Condensate Management Automatic Drain Valve

29 May 2019 12:07
Tags

Back to list of posts

Condensate drains remove condensate separated in centrifugal separators, air receivers, refrigeration dryers and filters from the compressed air system. Installed at collection points anywhere in your pneumatic system, these heavy-duty drains can be depended upon to discharge the condensate automatically and to eliminate the need for periodic or constant blow-downs so costly in time and compressed air losses.

The unit is suitable for a wide range of compressed air system components such as aftercoolers, dryers, filters, pressure vessels & piping systems condensate drain valve regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system.

First, the small filter supplied is fitted to the trap, and then connected to the filter with an 8-mm pneumatic hose, and the control air to the cylinder is connected to the pressure with a 4 - 6 bar pressure control using a 6∅ pneumatic hose or an inlet.

The use of intelligent level controlled drains to reduce compressed air wastage & leak reduction is an effective way to reduce compressed air wastage & power costs. Trident's condensate sensing type automatic drain valve is the latest advancement in drain valve technology.

The collection chamber is connected to a third external port in the valve body. The water level within the housing operates the drain valve float assembly. Designed an industrially robust, totally pneumatic, automatic condensate removal drain valve for compressed air and gas systems.

Other system drain valves, sight glasses, and pressure gauges (15) could also be attached to the collection chamber(s) to further consolidate the piping in the system, thereby reducing system installation labor and components. This port is labeled as leading to system drain piping, and this position may be used to directly connect the system piping (13) to a drain or the atmosphere.

It is fit with mechanical filter to protect condensate drain solenoid valve. ECompressedair is an independent supplier of aftermarket compressor replacement parts and is not affiliated with most manufacturers mentioned in this web site. Other drain trap devices with small orifices and poppet style valves or gasket discharge seals are prone to clog when solid debris is present.

Show a double L” ball embodiment of the invention, in the collect” and drain” positions, respectively, in an embodiment with a collection chamber integral with the valve body. When the timer times-out, the coil is de-energized and the valve is spring-returned to the closed position.

This includes timer controlled drains and level sensing drains , which can be powered electrically, magnetically, or pneumatically. Therefore, avoiding loss of compressed air to limit energy costs is important. The valve is connected to a low spot in the piping system, so that condensate will drain by gravity down to the valve.

This port is connected to a second port that redirects flow into and out of the collection chamber, dependent upon the position of the first port. The WD 80 drain valve provides completely automatic drainage of the condensate that collects at the bottom of the air receiver.

Numatics EDV Series condensate drain valves eliminate the manual draining of pneumatic air lines. This is Granzow's standard electronic drain valve timer. This compressed air is transported through a system of pipes. The condensate discharge requirements are ultimately determined by the purpose for which the treated compressed air is used.

Comments: 0

Add a New Comment

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License